阿托斯PFE固定排量葉片泵功能
更新時間：2016-10-20 點擊次數：1711次
阿托斯PFE固定排量葉片泵功能
意大利ATOS阿托斯葉片泵
PFE固定排量葉片泵是高性能工業泵，具有顯著的特點：
優良的可靠性和易于維修
長工作壽命，超過106個循環
低噪聲電平，如圖所示
適用于液壓油或合成油
高技術的設計和制造
zui大的多功能性任何使用
ATEX認證執行請求
*的套筒設計，具有軸向和徑向液壓負載的平衡
定子，轉子和頰板之間的自動間隙補償=高容積效率
具有偏心葉片銷的12葉片轉子=減少的輸出脈動和噪聲
對稱頰板，凸輪輪廓和葉片的優化設計
功率重量比超過5kW / kg
壓力可達210÷300巴
13位移16至150 cm3 / rev
3基本型號
盒的*互換性
安裝符合ISO，SAE和DIN標準
PFED雙葉片泵設計=易于維修
阿托斯PFE固定排量葉片泵功能
| Vane pumps |
PFE fixed displacement vane pumps are high-performance industrial pumps offering remarkable features: - excellent reliability and easy servicing
- long working life, over 106 cycles
- low noise level, as shown on diagram
- suitable for hydraulic oils or synthetic fluids
- high technology in design and manufacturing
- maximum versatility for any use
- ATEX certified execution on request
| 
|
| - exclusive cartridge design with balance of axial and radial hydraulic loads
- auto clearance compensation between stator, rotor and cheek-plates = high volumetric efficiency
- 12-vane rotor with eccentric undervane pins = reduced output pulsations and noise
- optimized design of symmetric cheek-plates, cam contour and vane tips
- power to weight ratio exceeds 5 kW/kg
- pressure up to 210 ÷ 300 bar
- 13 displacements 16 to 150 cm3/rev
|
- 3 basic models
- full interchangeability of cartridges
- mounting according to ISO, SAE and DIN standards
| |
PFED double vane pump
Cartridge design = easy service
阿托斯PFE固定排量葉片泵功能
